8-port PoE switch with AI detection, IEEE 802.3af/at compliance, VLAN/Extend modes, and 120W power budget.
Product Characteristics:
- 8 100M PoE ports + 2 100M uplink network ports
- Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards
- Ethernet port supports 10/100M adaptive
- The PoE port automatically turns on the AI mode in VLAN and Extend modes.
- Flow control mode: Full duplex adopts IEEE 802.3x standard, half duplex adopts Back pressure standard
- Support automatic port flipping (Auto MDI/MDIX)
- Zero-configuration feature, automatically provisioned to adaptive devices
- Panel indicators monitor working status and help fault analysis
- Comes with three-position one-button smart DIP switch, supporting three modes: VLAN, Normal, and Extend.
- Support port lightning protection surge: common mode 4KV; electrostatic ESD: air 8KV, contact 6KV
Corporate Strength


Specifications:
| Port | 100M PoE | 8 |
| 100M Cascade RJ45 | 2 | |
| Function | Storage and Forwarding | Support |
| Exchange Content | 2G | |
| MAC Address | 2K | |
| Use Environment | Working temperature: -10 ℃ ~ 50 ℃
Storage temperature: -40 ℃ ~ 70 ℃ |
|
| Working humidity: 10% ~ 90% RH does not condense
Storage humidity: 5% ~ 95% RH does not condense |
||
| PoE Standard | IEEE802.3af (15.4W)
IEEE802.3at (30W) |
|
| Input Power Supply | AC Input 100-240V | |
| Supported Standards & Protocols | IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet IEEE 802.3x flow control |
|
| System Mode | VLAN: Port isolation mode. Ports 1-8 cannot communicate with each other and can only communicate with the UP-link port. Port AI mode is enabled.
Normal: Normal mode, all interfaces can communicate with each other, the transmission distance is within 100 meters, the transmission rate is 10M/100M adaptive; the port AI mode is turned off Extend: Link extension mode. In this mode, the PoE power supply and data transmission distance of the switch can be extended to 250 meters, and the transmission rate becomes 10M; the port AI mode is turned on |
|
| Network Medium | 10Base-T: Cat3, 4, 5 or above UTP/STP (≤100m)
100Base-TX: Cat5 or above UTP/STP (≤100m) |
|
| Physical Specification | Product size: 200*118*44mm
Packaging size: 230*190*70mm |
|
Message
Recommend











